• EHS 1700: INCIDENT PREVENTION & INVESTIGATION

  3.00 Credits

  Central Wyoming College

  
  This course presents an introduction to incident and investigation procedures and analytical techniques. A major emphasis is placed upon the prevention of industrial accidents. Principles of behavior-based safety and techniques for influencing positive behavior change will be taught. The course will also cover accident reconstruction, incident reporting and forms, and basic interviewing skills. Prerequisite: Math 1000. (3 lect.)
  ShareEHS 1700 - INCIDENT PREVENTION & INVESTIGATION

• EHS 1750: PROCESS SAFETY MANAGEMENT

  1.00 Credits

  Central Wyoming College

  
  This course will present an overview of the Process Safety Management standard found in the Occupational Safety and Health Administration (OSHA) 29 Code of Federal Regulations (CFR) 1910.119. This course will cover the standards and recommendations set forth by OSHA to prevent the release of highly hazardous chemicals (HHC's) through various risk and probability analyses. The primary goal of this course is to identify the requirements for preventing or minimizing the consequences of the release of toxic, reactive, flammable or explosive chemicals. (1 lect.)
  ShareEHS 1750 - PROCESS SAFETY MANAGEMENT

• EHS 2500: ENVIRONMENTAL COMPLIANCE TECHNOLOGY

  3.00 Credits

  Central Wyoming College

  
  This course explores the application of environmental laws and regulations to the implementation of appropriate compliance strategies, industry processes, and current technologies. Regulations concerning the handling and transport of hazardous materials, air and water pollution prevention and management, and environmental auditing and inspections will be explored in detail.
  ShareEHS 2500 - ENVIRONMENTAL COMPLIANCE TECHNOLOGY

• ELAP 1515: ELECTRICAL APPRENTICESHIP 1A

  2.00 Credits

  Central Wyoming College

  
  This course is the first in a series of eight courses at the electrical apprentice level. This course meets the related apprenticeship training requirements of the State of Wyoming, Department of Fire Prevention & Electrical Safety. It is not required that students be participating in an apprenticeship program to enroll in this course, but it is recommended. The curriculum for this course corresponds to the level 1 requirements of the National Center for Construction Education & Research (NCCER). This course introduces students to electrical safety, basic electrical theories, electrical testing equipment, hand bending conduit, and installing fasteners and anchors. Students can expect to complete a minimum of 3 hours coursework outside of class each week. (Related apprenticeship training hours: 32 hours lecture - 48 hours outside coursework)(2 lect.)
  ShareELAP 1515 - ELECTRICAL APPRENTICESHIP 1A

• ELAP 1525: ELECTRICAL APPRENTICESHIP 1B

  2.00 Credits

  Central Wyoming College

  
  This course is the second in a series of eight courses at the electrical apprentice level. This course meets the related apprenticeship training requirements of the State of Wyoming, Department of Fire Prevention & Electrical Safety. It is not required that students be participating in an apprenticeship program to enroll in this course, but it is recommended. The curriculum for this course corresponds to the level 1 requirements of the National Center for Construction Education & Research (NCCER). This course introduces students to the National Electrical Code, and instructs them in the topics of raceways, boxes, fittings, conductors, electrical blueprints, and com-mercial, industrial, and residential wiring. Students can expect to complete a minimum of 3 hours coursework outside of class each week. (Related apprenticeship training hours: 32 hours lecture - 48 hours outside coursework) (2 lect.)
  ShareELAP 1525 - ELECTRICAL APPRENTICESHIP 1B

• ELAP 1535: ELECTRICAL APPRENTICESHIP 2A

  4.00 Credits

  Central Wyoming College

  
  This course is the third in a series of eight courses at the electrical apprentice level. This course meets the related apprenticeship train-ing requirements of the State of Wyoming, Department of Fire Prevention & Electrical Safety. It is not required that students be partici-pating in an apprenticeship program to enroll in this course, but it is recommended. The curriculum for this course corresponds to the level 1 requirements of the National Center for Construction Education & Research (NCCER). This course continues instruction in the National Electrical Code, and instructs students in the topics of alternating current, motors, ground, conduit bending, boxes and fittings, and conductor installations. Students can expect to complete a minimum of 3 hours coursework outside of class each week. (Related apprenticeship training hours: 64 hours lecture - 48 hours outside coursework) (4 lect.)
  ShareELAP 1535 - ELECTRICAL APPRENTICESHIP 2A

• ELAP 1545: ELECTRICAL APPRENTICESHIP 2B

  3.00 Credits

  Central Wyoming College

  
  This course is the fourth in a series of eight courses at the electrical apprentice level. This course meets the related apprenticeship training requirements of the State of Wyoming, Department of Fire Prevention & Electrical Safety. It is not required that students be participating in an apprenticeship program to enroll in this course, but it is recommended. The curriculum for this course corresponds to the level 1 requirements of the National Center for Construction Education & Research (NCCER). This course continues instruction in the National Electrical Code, and instructs students in the topics of cable trays, conductor terminations and splices, installation of elec-trical services, circuit breakers and fuses, contractors and relays, and electrical lighting. Students can expect to complete a minimum of 3 hours coursework outside of class each week. (Related apprenticeship training hours: 48 hours lecture - 48 hours outside course-work) (3 lect.)
  ShareELAP 1545 - ELECTRICAL APPRENTICESHIP 2B

• ELAP 1555: ELECTRICAL APPRENTICESHIP 3A

  4.00 Credits

  Central Wyoming College

  
  This course is the fifth in a series of eight courses at the electrical apprentice level. This course meets the related apprenticeship training requirements of the State of Wyoming, Department of Fire Prevention & Electrical Safety. It is not required that students be participating in an apprenticeship program to enroll in this course, but it is recommended. The curriculum for this course corresponds to the level 1 requirements of the National Center for Construction Education & Research (NCCER). This course continues instruction in the National Electrical Code, and instructs students in the topics of load calculators (branch and feeder circuits), conductor selection and calculations, overcurrent protection, raceway, box and fitting fill requirements, wiring devices, and equipment distribution. Students can expect to complete a minimum of 3 hours coursework outside of class each week. (Related apprenticeship training hours: 64 hours lecture - 48 hours outside coursework) (4 lect.)
  ShareELAP 1555 - ELECTRICAL APPRENTICESHIP 3A

• ELAP 1565: ELECTRICAL APPRENTICESHIP 3B

  4.00 Credits

  Central Wyoming College

  
  This course is the sixth in a series of eight courses at the electrical apprentice level. This course meets the related apprenticeship train-ing requirements of the State of Wyoming, Department of Fire Prevention & Electrical Safety. It is not required that students be partici-pating in an apprenticeship program to enroll in this course, but it is recommended. The curriculum for this course corresponds to the level 1 requirements of the National Center for Construction Education & Research (NCCER). This course continues instruction in the National Electrical Code, and instructs students in the topics of distribution system transformers, lamps, ballasts and components, motor calculations, motor maintenance, motor controls, and hazardous locations. Students can expect to complete a minimum of 3 hours coursework outside of class each week. (Related apprenticeship training hours: 64 hours lecture - 48 hours outside coursework) (4 lect.)
  ShareELAP 1565 - ELECTRICAL APPRENTICESHIP 3B

• ELAP 1575: ELECTRICAL APPRENTICESHIP 4A

  3.00 Credits

  Central Wyoming College

  
  This course is the seventh in a series of eight courses at the electrical apprentice level. This course meets the related apprenticeship training requirements of the State of Wyoming, Department of Fire Prevention & Electrical Safety. It is not required that students be participating in an apprenticeship program to enroll in this course, but it is recommended. The curriculum for this course corresponds to the level 4 requirements of the National Center for Construction Education and Research (NCCER). This course will instruct students in the topics of load calculations, lighting, emergency and alarm systems, basic electronic theory, and specialty transformers. Students can expect to complete a minimum of 3 hours coursework outside of class each week. (Related apprenticeship training hours: 48 hours lecture - 48 hours outside coursework)(3 lect.)
  ShareELAP 1575 - ELECTRICAL APPRENTICESHIP 4A